Where on Your Car, Can Find the Information That Tells You How Much Air to Put in Your Tires?

Download Article

Download Article

Keeping the appropriate air pressure in your tires is one way to help maintain the safety of your vehicle. Low air pressure can lead to overheating the tires, extra wear on your tires, and overuse of gasoline. Learning how to check and add air to car tires is an essential skill that every driver should master.

Steps

1. 1

   Obtain a tire gauge from an auto store or auto department of a hardware store.

   • Simple gauges work well. Digital gauges are not necessary.
   • Gauge prices range from a couple of dollars to $20.
   • Tire gauges measure pounds per square inch (standard) or kilo Pascal's (metric).

2. 2

   Determine how much air should be in your tires. This will be printed on a sticker on the inside of the driver's side door or in the owner's manual. If you can't find the sticker, it may also be located inside the glove box door or fuel door.^[1]

   • Look at the writing on the side of your tires. The tire will have a maximum PSI or KPA number. This is the maximum pounds per square inch or kilo Pascal's that your tires can handle. It is not advisable to fill your tires to this pressure.

   Advertisement

3. 3

   Check the air in your tires when the tires are cold. Try checking the tires first thing in the morning after the car has been turned off all night.

   • Allow the car to sit for 30 minutes to three hours before checking air in car tires for the most accurate reading.
   • If you must drive to check the air in your tires, try to make the trip less than 1 mile (1.6 km).^[2]

4. 4

   Unscrew the cap off of the tire's valve stem.

5. 5

   Place the tire gauge onto the tire valve stem.

6. 6

   Press the tire gauge firmly down on top of the valve stem.

   • Some air may escape when you begin applying pressure. However, the air should stop leaking out once the pressure is increased and the gauge is evenly on the valve.

7. 7

   Read the gauge to gain information about the PSI or KPA in your tires. ^[3]

   • Standard gauges will blow out a stick. The notch on the stick where it stopped when blown out is the reading.
   • Digital gauges will give a digital number as the reading.

8. 8

   Carry out the process with all 4 tires to maintain a balance among them.

9. 9

   Gain access to air either by getting an air hose and compressor ready or putting money into an air machine. ^[4]

10. 10

    Place the air hose nozzle over the open valve stem.

11. 11

    Add pressure to the nozzle as you did with the tire gauge.

    • The nozzle is on correctly when air stops leaking from the outside of the tire and is going inside of the tire.

12. 12

    Allow a small burst of air to go inside of the tire. ^[5]

13. 13

    Remove the hose when the burst is complete.

14. 14

    Use the tire gauge to see the new pressure of air in the tire.

    • Do not go over 5 PSI or KPA than is recommended for your tires.
    • If the pressure is still too low, add another small burst of air and recheck the pressure.
    • Continue the process until the PSI is met.
    • If you put too much air in the tire, press against the pin in the valve stem with the gauge and let a small amount of air release from the tire. Recheck the tire pressure.

15. 15

    Replace the valve stem cap.

    Advertisement

Add New Question

• Question

  How do I determine the proper air pressure for my tire?

  

  The proper tire pressure will be written on the side of the tire. You can check it with a tire gauge.

• Question

  Best air pressure for Volkswagen fox?

  

  That depends on the tire. Check the tire for more info about the amount of bars.

• Question

  I have 14/65/165 tires on my car. What should the correct pressure be?

  

  If they are the same size as the original tires, there should be a sticker in the driver's side doorjamb which tells you what the vehicle manufacturer recommends as air pressure. Alternatively, the sidewall of the tire has the tire maker's maximum recommended air pressure molded into it - it will say something like "42 PSI" (the number will obviously depend on the car).

• Question

  I put too much air in a tire and pushing against the valve stem will not release the air. What do I do?

  

  Logic Johnson Lafontaine

  Top Answerer

  You can usually just reinsert the inflation head, just enough so that it opens the valve but doesn't stay airtight (like it does when you're inflating the tires). You will hear air hissing out. Or you can do the same thing with your tire gauge. Anything that plugs into the valve will let air out if its not pushed in all the way.

• Question

  How do I know how much air to add for my specific car make and model?

  

  A maximum pressure at a maximum load (vehicle weight + occupants + any random items within the vehicle) should be on the tire itself. The manufacturer's recommended tire pressure can be found in your vehicle's manual and is also usually on a placard most commonly on the driver door, driver's side rear door, or either frame. It can also be located under the hood or in the glove box.

• Question

  How do I determine the correct air pressure for my car tires if I have larger ones than those recommended for the vehicle?

  

  You need to go a bit by feeling. Car tires normally won't explode by too much pressure, but if you want to be sure you have the right bar, check the tire itself. Most pumps have an bar meter, so pump air into the tire till the meter says the given amount of bars.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

• Place the cap to the valve stem in your pocket or in a location where it will not get lost.

• For the best maintenance, check your tire pressure once a month.

• Some vehicles use a different pressure for the front and rear tires.

• Over-inflating the tires can cause excessive wear in the center of the tires and cause overheating.^[6]

• The tire pressures recommended by the vehicle manufacturer may be different from the tire manufacturer. Follow the vehicle manufacturer recommendations.

Advertisement

Things You'll Need

• Tire gauge
• Access to air hose and compressor

About This Article

Thanks to all authors for creating a page that has been read 247,947 times.

Did this article help you?

Where on Your Car, Can Find the Information That Tells You How Much Air to Put in Your Tires?

Source: https://www.wikihow.com/Check-and-Add-Air-to-Car-Tires

Share this post